Solid lubrication paste of the newest technology. It is used as a lubrication and anti-seize paste in the rail industry, as well as Steel and Cement industries and can also be used as high temperature chain lubrication.

Adhesive and easily applied paste. The base oil has a high lubricity and includes a special polymer and corrosion protection additive. ALUMINIUM PASTE, is very resistant against water, light acids etc. and is compatible with all sealing materials. Therefore it can be used in wet, dusty and hot conditions.

ALUMINIUM PASTE , as a lubrication paste in an Oxygen environment to approximately 250°C. ALUMINIUM PASTE , as an Anti-seize without Oxygen to 1200°C.

STRUB ZINKOL ZIRKULARFETT , is a saw-, cutting and corrosion protection grease used for drilling, tapping, cutting all materials.

STRUB ZINKOL ZIRKULARFETT, is a synthetic non-poisonous, adhesive, universal cutting- and corrosion protection grease. It has extremely good EP-properties and a wide field of application. STRUB ZINKOL ZIRKULARFETT was made with the help of the Swiss light-metal industry, to suit their needs. STRUB ZINKOL ZIRKULARFETT is recommended for the following industries: aluminium, machine-fabrication, maintenance shops, woodwork and saw mills, plumbers.

During rotation: Apply on both sides of the blade the shavings will not stick on the blade: therefore, there will be no sticking or tightening (clamping). For the lubrication of jigsaw-blades of all types of materials. Because of the usage of STRUB ZINKOL ZIRKULARFETT there is no finishing work to be done. For all tapping and thread cutting. (Inside and outside threads: up to a hardness of 140kg.) For corrosion protection on bolts and threads, etc. (Protection against rust, weak acids and alkaline)

Features:

• No corrosion.
• For sharpening of tools on cuttingstones (oil stones)
• For construction work (no oil needed)
• For sealing of bolts and threads, with of without hemp.
• Stops the gum of the wood to stick to the tools.

STRUB CERAMIC PASTE , is suitable against rust and seizing up of cylinders, brakes - and steering rods, adjustment screw, springs, pins, brake cylinders, petrol jets etc.

STRUB CERAMIC PASTE is a first class montage paste for fitting bushes, pass- and press fits, gears and shafts.

STRUB CERAMIC PASTE , stops corrosion and seize up.

STRUB CERAMIC PASTE is a white extreme temperature paste with 4 synergistic solid lubricant combinations. The selected lubricant components stop tribo-corrosion up to 1400°C.

STRUB CERAMIC PASTE, is highly resistant against salt water, acids, and alkaline.

These pastes are extraordinary in a way that the grit dissolves slowly, when it comes into contact with mineral oil (machine oil) and during work under pressure and heat when lapping it forms a colloidal, soft and harmless substance.

At the same time the surface gets continuously plated with Mos 2 , so that the finished product, is a top quality work piece where there carrying surfaces show an even layer of Mos² base film.

The lapping grit cannot penetrate into the metal, as the lapping process is completely controlled. With one and the same lapping paste (grit) only one work procedure is needed from rough lapping to polishing.

Molymagus Mos² – lapping compound is available in a paste (Type 1) and also as a powder (Type 2), but mainly the paste is used.

STRUB HTP PASTE , is a solid lubricating paste, based on the newest technology. It is an anti seize, lubricating and fitting paste, used in the railways, building construction industry, and automotive-, steel-, and cement industries, for the rings on the drum kilns etc.

STRUB HTP PASTE, is very tacky and easy to apply. STRUB HTP PASTE , are based on high quality lubrication oils and esters, with special additives which also gives excellent corrosion protection. STRUB HTP PASTE , is very resistant against water, acids, alkalines, etc. STRUB HTP PASTE , is compatible with all commonly used materials. STRUB HTP PASTE , can also be used where wet or dusty conditions are present.

PASTE S , is a universal paste with a very high percentage of synergistic active solid lubricants.

Features:

• It offers protection against rust, fretting and cold welding.
• It makes screw connections easier to loosen.
• It makes thread spindles, links, bolts and other sliding surfaces easily moveable.
• Excellent for long life sliding bearings, which are under strong static pressure (surface pressure).
• It avoids squeaking of blade springs.

Cleaned surfaces of pieces must be dry before applying PASTE S , with a fibre free cloth or brush.

PASTE S-58 HN is a dry lubricant which is used on shafts, bearings, chains, etc. in order to reduce friction. It is an exceptional lubricant on chains and areas where dust is a problem.